Digital Equipment DEC 3000 Series Service Information page 31

Console Security,
Entering the
Privileged
State
Exiting the
Privileged
State
Disabling
Console
Security
Continued
To enter the privileged state on a secured console, issue a LOGIN
command as follows:
>>> LOGIN {password}
Use the password created with the SET PASSWORD command.
The password is not echoed or displayed.
The following commands allow you to exit the privileged state:

BOOT

CONTINUE

HALT
To disable console security:
1. In console mode, set the SECURE variable to ON.
2. Remove the secure jumper on the I/O module.
RETURN
Continued on next page
2–7