Digital Equipment DEC 3000 Series Service Information page 64

BOOT Command Parameter and Qualifiers,
Qualifiers
Examples
3–6
-fl <value>
Specifies flags in an ASCII string of up to 23 characters. The
string must be enclosed in quotation marks to be passed to the
operating system unmodified.
-fi <filename>
Used when booting across a network device to specify the name of
a file to load into the operating system. The filename is limited to
23 characters.
Qualifier
-fl <value>
-fi <filename>
This example uses the default boot specification:
Return
>>> BOOT
This example for an OpenVMS system boots from a disk device on
SCSI controller A with a SCSI ID of 4 and an LUN of 0, using the
default flag values:
>>> BOOT DKA400 Return
This example for an OpenVMS system performs a MOP boot to
device ESA0 with the flags equal to 0,0:
>>> BOOT -FL 0,0 ESA0
Description
Specifies flags in an ASCII string of up to 23
characters.
Used when booting across a network device
to specify the name of a file to load into the
system.
Return
Continued
Continued on next page