Digital Equipment DEC 3000 Series Service Information page 131

Running Diagnostic Tests,
Examples The following example runs the MEM and NVR diagnostics.
When specifying individual tests, separate the device names with
a comma.
>>> T MEM,NVR Return
The following example runs a range of tests, starting with the
ASIC diagnostic and ending with the ISDN diagnostic.
When specifying a range, separate the device names with a colon.
Return
>>> T ASIC:ISDN
If you select SCSI, NI, and SCC diagnostics in service
mode, you need loopback connectors and the SCSI
terminator mounted. Otherwise, an error will occur.
Diagnostics that run in console mode will also run in
service mode.
The following example runs the range of diagnostics from the
ASIC diagnostic to the MEMORY diagnostic, then continues with
the SCC diagnostic:
>>> T ASIC:MEM,SCC
The following example runs the SCC diagnostic, then runs
the range of diagnostics from the ASIC diagnostic to the CXT
diagnostic:
>>> T SCC,ASIC:CXT
Continued
NOTE
Return
Return
Continued on next page
4–7