Installation Procedure
(H9A00-AJ Cabinet),
Install the
Faceplate
Mounting
Brackets
F–22
Continued
Required materials:
Two 6/32 screws
Four 10/32 screws
Right mounting bracket (PN 74–45544–01)
Left mounting bracket (PN 74–45543–01)
To install the faceplate mounting brackets (Figure F–10):
Steps
Action
1
Use the two 6/32 screws to secure the right faceplate
mounting brackets
The left faceplate bracket is secured using the screws
that are already in place on the power supply.
2
Count up 12 holes and 18 holes from the bottom of the
installation area on the front cabinet rails.
3
Insert clip nuts at the locations determined in step 2 (if
not already installed).
4
Push the PE50A–B9/D9 unit into the cabinet.
5
Use the four 10/32 screws to secure the faceplate
mounting brackets
to the system .
to the cabinet.
Continued on next page