Digital Equipment DEC 3000 Series Service Information page 362

Installation Procedure
(H9A00-AJ Cabinet),
Install the
Faceplate
F–24
Continued
Required materials:

Faceplate (PN 70–30304–01)

Four 10/32 screws
To install the faceplate (Figure F–11):
Step Action
1 Align the face with the holes at the front of the cabinet.
2 Secure the faceplate to the front of the cabinet with the
four 10/32 screws.
In Figure F–11, the faceplate has two option inserts.
The bottom insert is for an RZ26 drive. The top insert
is a blank, used when no other drive is installed with
the RZ26.
NOTE
Continued on next page