Digital Equipment DEC 3000 Series Service Information page 348

Installation Procedure
(H9A00-AJ Cabinet),
Assemble the
Right Side
Chassis Slide
Subassembly
(continued)
F–10
Continued
To assemble the right side chassis slide subassembly (Figure F–4):
Steps Action
1 Orient the slide mounting bracket
facing out.
2 Use four 8/32 screws to secure the slide mounting
brackets to the chassis slide
screws at the rear slide mounting bracket.
3 Use four 8/32 screws to secure the slide mounting angle
brace to the chassis slide.
so the IEC end is
. Do not tighten the two
Continued on next page