Digital Equipment DEC 3000 Series Service Information page 295

SCSI Diagnostic Status/Error Messages,
Information Description
53 Boot block checksum error.
54 Boot block flags is not zero.
55 Boot block count is zero.
56 Device is too small for specified read or write..
57 Device block size is not valid.
58 Prom$ routine error.
59 Error parsing boot string.
90 SCSI bus specified is not valid.
91 Utility specified is not valid.
92 Device number specified is not valid.
93 LUN specified is not valid.
94 Wrong number of parameters for utility .
95 Device number specified is the same as the host.
96 Wrong mode of operation.
97 Not enough data returned from device.
98 Device is not a disk.
99 Device is not a tape.
9A Device is not removable.
9B Device is removable.
9C Media is write protected.
9D Device is not ready.
9E Data read is incorrect.
9F LUN is illegal.
A0 Problem building format page.
A1 Problem building flexible page.
A2 Disk capacity is too small.
A3 Console function error.
A4 Illegal floppy drive.
A5 Illegal floppy media.
Continued
C–43