Digital Equipment DEC 3000 Series Service Information page 82

SET Command Parameters and Qualifiers,
DIAG_QUICK
Format
Qualifier
Example
3–24
Sets the diagnostic startup mode to normal testing or fast startup
testing. If you select fast mode, not all diagnostic tests are
performed.
>>> SET DIAG_QUICK {qualifier}
Select one of the following qualifiers to set the diagnostic startup
mode:
Qualifier Description
ON Quick verification testing
OFF Normal testing
This example sets the diagnostic startup mode to quick verify
testing:
>>> SET DIAG_QUICK ON
Result:
DIAG_QUICK = ON
Return
Return
Continued
Continued on next page