Digital Equipment DEC 3000 Series Service Information page 291

Hide thumbs Also See for DEC 3000 Series:
Table of Contents

Advertisement

SCSI Diagnostic Status/Error Messages,
? T-ERR-SCSI (bus) - Data Trans test - virt dma inq
T-ERR-SCSI (bus)
T-ERR-SCSI (bus) - actcmd = (actual command)
status = (status) int = (interrupt)
T-ERR-SCSI (bus) - IR = (ir) CIR = (cir) IME = (ime)
T-ERR-SCSI (bus) - snskey = (sense key) extfru = (extended fru info)
? T-ERR-SCSI (bus) - Data
? T-ERR-SCSI (bus) - Data Trans test - nondma/dma inq size miscompare
? T-ERR-SCSI (bus) - Data Trans test - nondma/dma_nonal inq size
miscompare
? T-ERR-SCSI (bus)
miscompare
? T-ERR-SCSI (bus) - Data Trans test - nondma/sync inq size miscompare
? T-ERR-SCSI (bus) - Data Trans test - nondma/sync inq data miscompare
? T-ERR-SCSI (bus) - Data Trans test - nondma/virt inq size miscompare
? T-ERR-SCSI (bus) - Data Trans test - nondma/virt inq data miscompare
T-ERR-SCSI (bus) - id = (device id) lun = (logical unit number)
The following error messages could indicate a system
module failure. Before replacing the module, try
reseating the module.
? T-ERR-SCSI (bus) - Map Err test - ir notval
? T-ERR-SCSI (bus) - Map Err test - ir parerr
T-ERR-SCSI (bus) - id = (device id) lun = (logical unit number)
T-ERR-SCSI (bus) - virt data addr = (data addr)
T-ERR-SCSI (bus) - map reg data = (map data) IR = (ir) CIR = (cir)
? T-ERR-SCSI (bus) - Map Err test - DMA inq err
T-ERR-SCSI (bus) - id = (device id) lun = (logical unit number)
T-ERR-SCSI (bus) - actcmd = (actual command)
status = (status) int = (interrupt)
T-ERR-SCSI (bus) - IR = (ir) CIR = (cir) IME = (ime)
T-ERR-SCSI (bus) - snskey = (sense key) extfru = (extended fru info)
The following error messages could indicate a SCSI
device or I/O module failure. Before replacing the
device or module, try reseating them.
- id = (device id) lun = (logical unit number)
info = (informational value)
curcmd = (current command)
Trans test - nondma inq not enough data
- Data Trans test - nondma/dma_nonal inq data
NOTE
map reg addr
= (map reg adr)
info = (informational value)
curcmd = (current command)
NOTE
Continued
not set
not set
Continued on next page
C–39

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dec 3000 500 axpDec 3000 500s axp

Table of Contents