Running Diagnostic Tests,
Continuous
Run
Examples
4–8
You can use the console REPEAT command to run all or selected
diagnostics continuously. The diagnostics run until you press
at the console prompt or until an error occurs.
C
If you repeat the CXT diagnostics alone, you may need
to push the Halt button to stop the tests.
This example runs the MEMORY diagnostic continuously until
you press
at the console prompt:
Ctrl C
>>> R T MEM
Return
This example runs the memory diagnostic and the NVR diagnostic
continuously until you press
Return
>>> R T MEM,NVR
Continued
NOTE
at the console prompt:
Ctrl C
Ctrl