Digital Equipment DEC 3000 Series Service Information page 279

NI Diagnostic Error Codes,
Error
Code Description
84 LANCE collision: RETRY not flagged.
86 LANCE collision: transmitter disabled.
90 LANCE address filtering: initialization failed.
92 LANCE address filtering: transmit failed.
94 LANCE address filtering: receive failed.
96 LANCE address filtering: packet comparison failed.
98 LANCE address filtering: broadcast filtering failed.
9A LANCE address filtering: promiscuous mode failed.
9C LANCE address filtering: null destination accepted.
9E LANCE address filtering: good logical address
rejected.
A0 LANCE external loopback: initialization failed.
A2 LANCE external loopback: transmit failed.
A4 LANCE external loopback: receive failed.
A6 LANCE external loopback: packet comparison failed.
A8 LANCE external loopback: unknown transmit error.
AA LANCE external loopback: unknown receive error.
AC LANCE external loopback: check NI port lpbk
connector.
B0 LANCE tx BUFF: initialization failed.
B2 LANCE tx BUFF: BUFF error not flagged.
B4 LANCE tx BUFF: transmitter enabled.
B6 LANCE tx BUFF: unknown transmit error.
D0 DMA registers: MAP_BASE register error.
D2 DMA registers: I/O write access to map registers
failed.
D4 DMA registers: I/O read access to map registers
failed.
D6 DMA registers: parity error not flagged.
E4 LANCE DMA: valid DMA failed.
E6 LANCE DMA: DMA failed during initialization.
E8 LANCE DMA: DMA failed during transmit.
EA LANCE DMA: DMA failed during receive.
Continued
Continued on next page
C–27