Console Security,
Restoring
the Console
Password
2–8
Continued
If the console password is forgotten, you can enter a new password
as follows:
Perform a system shutdown.
1.
Power down the unit.
2.
3.
Remove the I/O module.
4.
Remove the secure jumper from the I/O module.
5.
Reinstall the I/O module with the secure jumper disabled.
Power up the unit.
6.
Enter the following DEPOSIT command:
7.
>>> DEP -U-Q-N:1 1E0200088 0
Power down the unit.
8.
9.
Remove the I/O module and install the secure jumper.
10. Reinstall the I/O module.
11. Power up the unit.
12. Enter the new password.
Return