Digital Equipment DEC 3000 Series Service Information page 83

SET Command Parameters and Qualifiers,
DIAG_SECTION
Format
Qualifier
Example
Specifies the diagnostic environment in which diagnostics can be
run.
>>> SET DIAG_SECTION {qualifier}
Select one of the following qualifiers to set the diagnostic
environment:
Qualifier Mode
1 Console
2 Service
This example sets the diagnostic environment to the console mode:
>>> SET DIAG_SECTION 1
Result:
DIAG_SECTION = 1
Return
Description
Default mode after power-up.
Provides a more thorough test
than in console mode. Loopback
connectors may be required to run
certain tests.
Return
Continued
Continued on next page
3–25