Installation Procedure
(H9A00-AJ Cabinet),
Install the
Rear Support
Bracket
F–26
Continued
Required materials:
Two 6/32 screws
Rear support bracket (PN 74–45545–01)
Four 10/32 screws
To install the rear support bracket (Figure F–12):
Steps
Action
1
At the rear cabinet rails, count up 20 holes and 23 holes
from the bottom of the installation area. Install clip nuts
on these holes, if not already installed.
2
Use the two 6/32 screws to secure the rear support
bracket
3
Use the four 10/32 screws to secure the rear support
bracket to the rear of the cabinet.
to the rear of the PE50A–B9/D9 unit
.
Continued on next page