SET Command Parameters and Qualifiers,
SERVER
Format
Qualifier
Example
Modifies SCC power-up diagnostics to match the DEC 3000 Model
500/500S AXP system configuration. You can specify a server
(Model 500S) or workstation (Model 500) configuration.
If you select the server setting, you do not have to connect
the keyboard and mouse to complete power-up diagnostics
successfully.
If you select the workstation setting, you must connect
the keyboard and mouse to complete power-up diagnostics
successfully.
>>> SET SERVER {qualifier}
Select one of the following qualifiers:
Qualifier
Description
ON
Specifies a server (Model 550S).
OFF
Specifies a workstation (Model 500). (default)
This example sets the configuration to a server:
>>> SET SERVER ON
Result:
SERVER = ON
Return
Return
Continued
Continued on next page
3–37