Chapter 5
General Settings
5.7
RAID Configuration Settings
A confirmation screen appears.
4
Click the [OK] button.
The volume is created and the registration completion screen appears.
5
Click the [Done] button.
The screen display returns to the [Volume] screen.
5.7.4
Copy Data Destination Volume (SDPV) Creation
Create a copy data destination volume in the backup RAID group.
Create a volume as an expansion area of SDV in the backup RAID group "RG1" created in
Creation" (page
Figure 5.10 Copy Data Destination Volume (SDPV) Creation
Backup RAID group (RG1)
2TB
2TB
RAID5(2+1)
71).
2TB
FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
Copy data destination volume
500GB
sdpv
(Snap Data Pool Volume)
76
"5.7.1 RAID Group
P3AM-9002-01ENZ0