Volume Creation; Connection Setup - Fujitsu ETERNUS DX S5 Series Operation Manual (Basic

4. Component Expansion/Function Enhancement
Adding Servers

Volume Creation

Create volumes in the RAID group. The procedure to create a volume is as follows:
1
Click the [Volume] tab on the navigation of the ETERNUS Web GUI screen.
The [Volume] screen appears.
2
In [Action], click [Create].
The [Create Volume] screen appears.
3
Select "Automatic" or "Manual" for "RAID Group / TPP Selection".
4
Enter the name of the volume that is to be created in "Name", set the required items, and click the
[Create] button.
A confirmation screen appears.
5
Click the [OK] button.
The volume is created and the registration completion screen appears.
6
Click the [Done] button.
The screen returns to the [Volume] screen.

Connection Setup

On the ETERNUS DX, perform information registration and host affinity creation for the server that is to be
added. On the server, operations such as preparing drivers and performing a LUN check are required.
For details on connection related setting procedures, refer to "Host Connection Settings" in "Configuration Guide
(Basic)". Also refer to "Configuration Guide -Server Connection-" as required.
The procedure to create a host affinity is as follows:
LUN group addition
•
• CA port parameter settings
CA port group creation
•
Host group addition
•
• Host affinity creation
68 Operation Guide (Basic)