Volume Creation; Connection Setup - Fujitsu ETERNUS AF250 S2 Basic Operation Manual

5. Component Expansion/Function Enhancement
Adding Servers

Volume Creation

Create volumes in the RAID group. The procedure to create a volume is as follows:
1
Click the [Volume] tab on the navigation of the ETERNUS Web GUI screen.
The [Volumes] screen appears.
2
In [Action], click [Create].
The [Create Volumes] screen appears.
3
Select "Automatic" or "Manual" for "RAID Group / TPP Selection".
4
Enter the name of the volume that is to be created in "Name", set the required items, and click the [Create]
button.
A confirmation screen appears.
5
Click the [OK] button.
The volume is created and the registration completion screen appears.
6
Click the [Done] button.
The screen returns to the [Volumes] screen.

Connection Setup

On the ETERNUS AF, perform information registration and host affinity creation for the server that is to be add-
ed. On the server, operations such as preparing drivers and performing a LUN check are required.
For details on connection related setting procedures, refer to "Configuration Guide (Basic)" or "Configuration
Guide (Web GUI)". Also refer to "Configuration Guide -Server Connection-" as required.
The procedure to create a host affinity is as follows:
Host group addition
•
CA port parameter settings
•
CA port group creation
•
• LUN group addition
Host affinity creation
•
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic)
Copyright 2019 FUJITSU LIMITED
68
P3AG-1842-06ENZ0