Table of Contents
Advertisement
Technical description
4.5 Surface treatment
The gearbox does not normally require additional cooling. The generously dimensioned
housing surface is sufficient for dissipating heat losses where there is free convection. If the
housing temperature exceeds a value of +80 °C, please contact Technical Support.
4.3
Clutch
Actuating the clutch lever interrupts the force flow in the positively driven claw coupling on the
output shaft. The output shaft can then freely rotate while the motor is stopped or in no-load
operation.
4.4
Rating plate
The rating plate of the gearbox or geared motor is printed on a labeled polyester film or
optionally on a stainless steel rating plate. The rating plate is glued using a special masking film.
The film ensures permanent resistance to UV radiation and media of all kinds, such as oils,
greases, salt water and cleaning agents.
The adhesive and material ensure firm adhesion and long-term readability throughout the
operating temperature range of the gearbox and geared motor.
The edges of the rating plate are paint-finished to match the color of the gearbox or motor to
which it is affixed.
4.5
Surface treatment
4.5.1
General information on surface treatment
All paint finishes are sprayed on.
NOTICE
Failure of the external protection
If the paint finish is damaged, the geared motor may corrode.
Do not damage the paint finish.
Note
Information about the ability to be repainted does not guarantee the quality of the paint product
supplied by your supplier.
Only the paint manufacturer is liable for the quality and compatibility.
Note
C1 paints are not suitable for ambient air temperatures under -20 °C.
30
SIMOGEAR electric monorail gearbox
Operating Instructions, 01/2024, A5E53220855A/RS-AA
Advertisement
Table of Contents
