Cleaning Procedures - Integra CUSA Clarity System Service And Maintenance Manual

6.3.1 Cleaning Procedures

Cleaning the Touchscreen:
Clean the touchscreen with a lint-free wipe and a cleaner. The cleaner may be window/glass cleaner, eyeglass cleaner, or an ammonia-based
disinfectant. Always apply the cleaner to the lint-free wipe, never directly on the touchscreen, to avoid scratching the surface.
Note
Do not wipe the touch screen with a sponge because it may scratch the surface.
Note
Never apply cleaner directly to the touch screen.
Cleaning the Console and Cart
• Unplug the power cord from the wall receptacle and the console.
• Clean the surface with a lint-free wipe soaked with one of the following:
o 70% IPA
o Super Sani-Cloth®
o Sani-Cloth® Bleach
• Make sure the surfaces remain visibly wet for a minimum of two (2) minutes, and then air dry.
• Clean the wheels at the base of the system cart to ensure that the anti-static four wheels function correctly.
WARNING
Do not allow fluids to enter the console.
Note
Make sure that the surface of the wheels is free from dirt and dust.
Make sure that the surface is completely dry before using the system again.
Cleaning the Footswitch
• Disconnect the footswitch from the console.
• Wipe it clean.
CUSA® Clarity System Service and Maintenance Manual Page 44 of 117 0645403-2-EN