Misc. Settings - ICP DAS USA PDS-220F Series User Manual

Programmable Serial-to-Fiber Device Server

4.5 Misc. Settings

The Miscellaneous Settings provides functions allowing items such as the alias name, Web read
only, restore factory default and change password to be configured, each of which will be described
in more detail below.
The following is an overview of the parameters contained in the Misc. Setup Page section:

Item
Login
Alias Name
Web Read Only
UPDATE
Click the this tab to proceed to the Login page that can disable "Web Read Only"
property, change password and Restore to Factory Default Settings, refer to the
Sections 4.5.1 "Disable the "Web Read Only"
Password" and Section 4.5.3 "Restore to Factory Default Settings"
information.
This parameter is used to assign an alias for each PDS-220Fx to assist with easy
identification.
This parameter is used to enable "Web Read Only" function. If the "Web Read Only"
properly is set to 1 (Enabled), the web server will not be able to save any new
configurations to the PDS-220Fx. The default setting should be 0 (Disabled).
0 = Disabled, 1 = Enabled
Click this button to save the revised settings to the PDS-220Fx.
PDS-220Fx Series User Manual
Description
Function", Section 4.5.2 "Change
Version 1.3, Oct. 2018
for more detail
- 51 -