ICP DAS USA PDS-220F Series User Manual page 24

Programmable Serial-to-Fiber Device Server
5. Check that the Init Switch (SW1) is in the
6. Supply power (+12 V
Top Panel
Figure 3-2
7.
Verify that the System LED (Sys.) indicator is flashing on the PDS-220Fx.
"Run"
~ +48 V ) to the PDS-220Fx.
DC DC
GND
Figure 3-3
PDS-220Fx Series User Manual
position.
PWR
Version 1.3, Oct. 2018
Power Supply
(12 ~ 48 VDC)
- 24 -