Programmable Serial-to-Fiber Device Server
6.1 Modbus/TCP to Modbus/RTU Gateway
Step 1: Configuring Baud Rate and Data Format
1.
Enter the URL address of the PDS-220Fx in the address bar of the browser to log in to the web
configuration pages.
2.
Click the "COM Port Settings" in the web page to configure the COM ports.
3.
Select the appropriate COM Port, Baud Rate and Data Format settings from the relevant drop
down options depending on your Modbus device, for example Port: COM2, Baud Rate: 19200,
Data Bits: 8, Parity: None, Stop Bits: 2.
4.
Click the "SET COM PORT" button to update it to PDS-220Fx.
PDS-220Fx Series User Manual
Figure 6-1-1
Figure 6-1-2
Version 1.3, Oct. 2018
- 66 -