Configuring The Virtual Com P; Pds-220F X Module - ICP DAS USA PDS-220F Series User Manual

Programmable Serial-to-Fiber Device Server
3. Enter the network settings information, including the IP, Mask and Gateway addresses, and then
click "OK" button. The new settings for the PDS-220Fx will take effect within 2 seconds. If you don't
know the correct network configuration information, contact your Network Administrator to obtain
the details.

Figure 3-5
3.5 Configuring the Virtual COM Ports
1. Wait 2 seconds and then click the "Search Servers" button again to ensure that the PDS-220Fx
is working correctly with the new configuration.
2. Click the name of PDS-220Fx to select it.


Figure 3-6
PDS-220Fx Series User Manual Version 1.3, Oct. 2018 - 26 -