Echocmdno - ICP DAS USA PDS-220F Series User Manual

Programmable Serial-to-Fiber Device Server

7.3.9 EchoCmdNo

This command is used to query or set the EchoCmdNo parameter.
The EchoCmdNo parameter is used to set whether the PDS-220Fx prefixes the Virtual COM
command to the corresponding response. (Virtual COM commands are used to configure a PDS-
220Fx through TCP port 10000)
Effect: Immediate
Command Arguments
EchoCmdNo
EchoCmdNo = 0
EchoCmdNo = 1
The figure illustrates is an example of a EchoCmdNo configuration.
Figure 7-3-9:
EchoCmdNo = 0
Description
Queries the EchoCmdNo settings.
If EchoCmdNo = 0, a Virtual COM command number will not be prefixed to the
corresponding response.
If EchoCmdNo = 1, a Virtual COM command number will be prefixed to the
corresponding response.
EchoCmdNo = 1
PDS-220Fx Series User Manual Version 1.3, Oct. 2018 - 84 -