Connection By Factory Default Settings (For New Brk) - ICP DAS USA BRK Series User Manual

2.2.1. Connection by Factory Default Settings (For New BRK)

The factory default settings of the BRK series are as the following table:
IP
Network Netmask
Gateway
Username
Web UI
Account
Password
1. Change the PC's IP setting as following.
modify.)
IP
Subnet mask
Gateway address
2. Make sure the PC and BRK is connecting through Ethernet. Then open a PC side browser (Ex:
Chrome, IE...).
Type http://192.168.255.1 in the URL address. Use Web UI default username / password "root" /
"root" to login the system.
Factory Default Settings of BRK
192.168.255.1
255.255.0.0
192.168.1.1
root
root
(Write down the PC original network settings before
11
BRK Series User Manual V1.0 - ICP DAS
Assign BRK-2800 a new IP setting
according to your case.
After the first login, change the
default username/password to
use other functions.
192.168.255.10
255.255.0.0
192.168.1.1