Load - ICP DAS USA PDS-220F Series User Manual

Programmable Serial-to-Fiber Device Server

7.3.21 LOAD

This command is used to loads file to the built-in flash disk on PDS-220Fx. It should be used to
update firmware only.
Effect: Immediate
Command Arguments
load
※ "Load" is not a Telnet command.
: The figure illustrates is an example of a Save = 0 configuration.
Figure 7-3-20
※When save = 0, the system doesn't back up the "autoexec.bat" and "vcom.ini" files to memory,
and doesn't clear the flash disk. It only loads the file that is selected specified.
Description
The command is coordinated with the MiniOS7 "load" command and can be
used to renew the "vcom3230.exe", "vcom.ini" or "autoexec.bat" file(s).
Save=0
PDS-220Fx Series User Manual
Load vp6_3230.exe
Version 1.3, Oct. 2018 - 91 -