Install Thev; Configuring Network Settings - ICP DAS USA PDS-220F Series User Manual
Programmable serial-to-fiber device server
Hide thumbs
Also See for PDS-220F Series:
- User manual (81 pages) ,
- Firmware update (9 pages) ,
- User manual (94 pages)
Table of Contents
Advertisement
Programmable Serial-to-Fiber Device Server
3.2 Install the VxComm Utility
The VxComm Utility can be obtained from either the ICP DAS FTP site or the ICP DAS web site. The
location of the download addresses are shown below:
http://ftp.icpdas.com/pub/cd/8000cd/napdos/driver/vxcomm_driver/windows/
ftp://ftp.icpdas.com/pub/cd/8000cd/napdos/driver/vxcomm_driver/windows/
3.3 Configuring Network Settings
1.
Double click the VxComm Utility shortcut on the desktop.
2.
"Search Servers"
Click the
3.
Once the search process is complete, double-click the name of the PDS-220Fx to open the
"Configure Server"
Factory Default Settings of PDS-220Fx:
IP Address
192.168.255.1
button to search for the PDS-220Fx.
dialog box.
Subnet Mask
255.255.0.0
PDS-220Fx Series User Manual
Gateway
192.168.0.1
Version 1.3, Oct. 2018
Figure 3-4
- 25 -
Advertisement
Table of Contents
