ICP DAS USA PDS-220F Series User Manual page 83

Programmable Serial-to-Fiber Device Server
7.3.8 M
This command is used to query or set the echo mode.
Effect: Immediate
Command Arguments
M
M = 0
M
= 1
M =2
The figure illustrates is an example of a M configuration.
Figure 7-3-8:
Description
Queries the echo mode settings.
Sets the Multi-echo mode to enable.
When set to multi-echo mode, the PDS-220Fx echoes data from a device to all
clients that are connected.
Sets the Single-echo mode to enable.
When set to single-echo mode, the PDS-220Fx echoes data from a device to
the client that requested the service.
Sets the Half-Save Mode to enable.
If only one client connects to the PDS-220Fx, the operation mode same as M0
mode; and if there are two or more clients connecting to the PDS-220Fx, the
operation mode same as M1 mode.
PDS-220Fx Series User Manual Version 1.3, Oct. 2018 - 83 -