ICP DAS USA PDS-220F Series User Manual page 97

Programmable Serial-to-Fiber Device Server
Step 9: The configuration of the PDS-220Fx as follows can be changed.
Please setting for with your PC same network region IP/Mask/Gateway addresses.
This example: 192.168.41.1/255.255.255.0/192.168.41.4
Table A-1: "setcom" parameters are as follows.
Port 1
Baud Rate
2 ~ 921600
Data Bit
7, 8: for COM 1
Parity
N, n : None parity
E, e : Even parity
O, o : Odd parity
Stop Bit
1: for COM 1
Step 10: Set the "SW1" in "Run" position and then power-on reboot the PDS-220Fx.
Top Panel
Power Supply
PDS-220Fx Series User Manual
Settings configuration command
ip [new ip]

mask [new mask]

gateway [new gateway]

mac [new mac]

setcom port (refer to Table A-1)

[baud][data_bit][parity][stop_bit]

Version 1.3, Oct. 2018 - 97 -