Advertisement
Quick Links
S
UPPORT
Models supported include PDS-811 and PDS-821
W
ARRANTY
All products manufactured by ICP DAS are warranted against
defective materials for a period of one year from the date of
delivery to the original purchaser.
W
ARNING
ICP DAS assumes no liability for damages consequent to the use
of this product. ICP DAS reserves the right to change this manual
at any time without notice. The information furnished by ICP
DAS is believed to be accurate and reliable. However, no
responsibility is assumed by ICP DAS for its use, nor for any
infringements of patents or other rights of third parties resulting
use.
from its
C
OPYRIGHT
Copyright © 2018 by ICP DAS. All rights are reserved.
T
RADEMARKS
Names are used for identification purposes only and may be
registered trademarks of their respective companies.
C
U
ONTACT
S
If you have any questions, please feel free to contact us. We will
respond within 2 working days.
Email:
service@icpdas.com ; service.icpdas@gmail.com
PDS-8x1 Series
MiniOS7 Update via 7188XW.exe
Version: 1.0/ Updated: Sep. 2018
Ch. 1. Setting up the PDS-8x1
Ch. 2. MiniOS7 Update Procedure
Ch. 3. Additional Information
ICP DAS CO., LTD.
Website: http://www.icpdas.com
Advertisement
Related Manuals for ICP DAS USA PDS-8 1 Series
Summary of Contents for ICP DAS USA PDS-8 1 Series
- Page 1 PDS-8x1 Series UPPORT Models supported include PDS-811 and PDS-821 MiniOS7 Update via 7188XW.exe ARRANTY All products manufactured by ICP DAS are warranted against Version: 1.0/ Updated: Sep. 2018 defective materials for a period of one year from the date of delivery to the original purchaser.
-
Page 2: Power Supply
1. Setting up the PDS-8x1 Before updating the MiniOS7, please ensure that the PDS-8x1 module is connected with your host computer. Refer to the following steps for the details. Step 1: Switch off the Power to the PDS-8x1 module. Step 2: Connect the DB-9 connector of CA-0910 download cable to your host computer. Step 3: Wire the CA-0910 to PDS-8x1 module, as follows: 3-1: Connect the CA-0910.TX... - Page 3 Step 4: Set the “Init/Run Switch” on the PDS-8x1 module to the in “Init” position to initiate the update. Step 5: Switch on the Power to the PDS-8x1 module. Power Supply MiniOS7 Update via 7188XW.exe (Ver. 1.0/Sep. 2018) Page: 2...
- Page 4 2. MiniOS7 Update Procedure Step 1: Download the MiniOS7 File of PDS-8x1 module and then decompress it to a temp folder, for example P824A-UDP-xxxxxxxx. Download the MiniOS7 OS Image File. The PDS-8x1 MiniOS7 OS image file is compressed in Zip format. You can decompress the zip file by 7-Zip, WinZip, WinRAR...
- Page 5 Step 3: Double click the UpdateOS.bat for starting update. Double Click Step 4: You are now ready to update the MiniOS7, the UpdateOS.bat file will auto run the 7188XW.exe utility program and shows the progress of the update. Step 5: The 7188XW.exe utility program will then upload the MiniOS7 file...
- Page 6 Step 6: The MiniOS7 updated completed when display [End file xxxx] [End of Key Thread.] message. Then click the “X” icon on the right-top corner of the windows to close it. Step 7: Set the “Init/Run Switch” on the PDS-8x1 module to the in “Run”...
- Page 7 Step 9: Connect both the PDS-8x1 module and your computer to the same sub network or the same Ethernet Switch. Step 10: Install the VxComm Utility your Host PC, and then run the Utility to search for any PDS-8x1 module connected to the nework.
- Page 8 Step 12: Click the name of the PDS-8x1 module. Step 13: Click the “Web” button. Step 14: Log in to the web configuration pages for the PDS-8x1. Step 15: Verify that the OS version and date details are correct. MiniOS7 Update via 7188XW.exe (Ver. 1.0/Sep. 2018) Page: 7...
-
Page 9: Additional Information
3. Additional Information Notes: Note 1: Make sure the 7188XW.exe and UpdateOS.bat program files exist on the same folder. If not, update MiniOS7 can’t be successful. …….…………………………………………………………………..……. back Note 2: If the IP address settings do not work correctly (e.g. there is no response to a ping command), please contact your network administrator to obtain a valid IP address for the PDS-8x1 module.