Network Settings - ICP DAS USA PDS-220F Series User Manual

ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru

5.2 Network Settings

Network (TCP/IP) Setup page:
IP Address
Subnet Mask
Gateway
The above three items are the most important network settings and should always
correspond to the LAN definition. If they do not match, the PDS-220Fx series module will
not operate correctly. If the settings are changed while the module is operating, any links
to Virtual COM Port based applications currently in use will be lost and an error will occur.
DHCP Client : 0 = disabled, 1 = enabled
It is recommended that the DHCP Client setting is kept as disabled, and using static
network settings. This ensures your PDS-220Fx series always using a fixed IP address,
and you don't need to configure the virtual COM mappings again and again.
PDS-220Fx Series User Manual (V1.2, Apr. 2015)
30