ICP DAS USA PDS-220F Series User Manual page 38

Programmable Serial-to-Fiber Device Server
Item
Save to EEPROM
Reload from EEPROM
Apply the current settings
UPDATE
Note:
After configuring IP filter settings, please confirm that the "Save to EEPROM" and "Apply
the current settings" option are checked, and then click the "UPDATE" button.
If the "UPDATE" button is clicked with checking "Save to EEPROM" option, the new
settings will be saved to the PDS-220Fx only and the new settings will be valid after
the next power-on.
If the "UPDATE" button is clicked with checking "Reload from EEPROM" option,
PDS-220Fx can apply the settings from EEPROM immediately.
If the "Apply the current settings" checked when the "UPDATE" button is clicked,
the new settings will be valid immediately.
Click this button to save the revised settings to the PDS-220Fx.
PDS-220Fx Series User Manual
Description
Version 1.3, Oct. 2018 - 38 -