Programmable Serial-to-Fiber Device Server
7.3.11 IP
This command is used to query or set the IP address.
Effect: After the next reboot.
Command
Arguments
IP
IP
= xxx.xxx.xxx.xxx
The figure illustrates is an example of a IP configuration.
Figure 7-3-11:
7.3.12 MASK
This command is used to query or set the subnet Mask value.
Effect: After the next reboot.
Command
Arguments
MASK
MASK
= xxx.xxx.xxx.xxx
The figure illustrates is an example of a MASK configuration.
Figure 7-3-12:
Description
Queries the IP address.
Sets the IP address.
Description
Queries the subnet Mask value.
Sets the subnet Mask value.
PDS-220Fx Series User Manual
Version 1.3, Oct. 2018
- 86 -