Ver; Save - ICP DAS USA PDS-220F Series User Manual

Programmable Serial-to-Fiber Device Server

7.3.19 VER

This command is used to query the version information for a PDS-220Fx.
Effect: Setting the version information is not allowed.
Command Arguments
VER
: The figure illustrates is an example of a VER configuration.
Figure 7-3-19

7.3.20 SAVE

This command is used to set the PDS-220Fx to backup or no-backup "autoexec.bat" and "vcom.ini"
files when using "load" command.
Effect: Immediate
Command Arguments
save = 1
save
= 0
(Default)
Refer to Figures 7-3-20 and 7-3-21 for detail illustrations.
Description
Queries the version information.
Description
When the "load" command is used, backup copies of the "autoexec.bat" and
"vcom.ini" files will be saved.
When the "load" command is used, backup copies of the "autoexec.bat" and
"vcom.ini" files will NOT be saved.
PDS-220Fx Series User Manual Version 1.3, Oct. 2018 - 90 -