ICP DAS USA PDS-220F Series User Manual page 68

Programmable Serial-to-Fiber Device Server

Step 3: Test Modbus/TCP to Modbus/RTU Gateway
1. In the VxComm Utility, select the "Modbus TCP Master" item from the "Tools" menu to open
the Modbus TCP Master Utility.
v2.12.15 [Dec. 13, 2014] or later.
In the Modbus TCP Master Utility, type the IP address and TCP port of PDS-220Fx and then
2.
click "Connect" button to connect the PDS-220Fx.
Note: This function is only supported by the VxComm driver version


PDS-220Fx Series User Manual
Figure 6-1-5
Figure 6-1-6
Version 1.3, Oct. 2018 - 68 -