How Do I Disable The M3 Mode (Modbus Gateway) - ICP DAS USA PDS-220F Series User Manual

Programmable Serial-to-Fiber Device Server

6.2.1 How do I disable the M3 Mode (Modbus Gateway)

Follow the procedure described below:
1. Click the "Modbus Gateway Settings" in the web page.
2. Select the appropriate COM Port from the "Port (COM0 for ALL PORTS)" drop down options,
for example "COM0" for all ports, and then enter the "0" in the "Number of ID for serial
Modbus device" field.
3. Checked the "Save to EEPROM" and "Apply the current settings" options, then click the
"Update" button to complete the setting.
4. Confirm that the serial COM ports are "Disable" in the "COM Port for Modbus Gateway
Settings" area.



PDS-220Fx Series User Manual

Figure 6-2-7
Version 1.3, Oct. 2018 - 74 -