Set Remote Vcom3 Connection - ICP DAS USA PDS-220F Series User Manual

Programmable Serial-to-Fiber Device Server

4.3.2 Set Remote VCOM3 Connection

Clicking the "Set Remote VCOM3 Connection" will display the PDS Remote Vcom3 connection
Setup Page allowing your enable and configure the pair connections for the PDS-220Fx, which will
be described in more detail below.
The following is an overview of the parameters contained in the Remote Vcom3 connection Setup
Page section:
Item
Add COM "Number"
connect to COM "Number"
@ IP= "IP Address"
cmd port= "command port"
(default: 10000)
Add COM "Number"
connect to IP= "IP Address"
Port= "TCP port"
Serial COM port number of the local device (Master)
Serial COM port number of the remote device (Slave)
IP address of the remote device (Slave)
Command Port number of the remote device (Slave)
Serial COM port number of the local device (Master)
IP address of the remote device (Slave)
TCP Port number of the remote device (Slave)
PDS-220Fx Series User Manual
Description
Version 1.3, Oct. 2018 - 46 -