Comparison Sheet; Console Modes ) - ICP DAS USA PDS-220F Series User Manual

Programmable Serial-to-Fiber Device Server
7.2 Comparison Sheet (Init, Run and Console
Modes)
Mode Firmware
Stop
Init Mode is used to upgrade firmware and accepts MiniOS7 commands (from PDS.COM1) only.
Init
Running
Run Mode is used for Virtual COM applications, and accepts Virtual COM commands (TCP port 10000) and
Run
Telnet commands (TCP port 23).
Running
Console Mode is used to configure the Virtual COM.
Console
PDS.COM1 is the console port that accepts console commands while other ports are still working with
Virtual COM applications.
VCOM Commands
No
Yes
Yes
PDS-220Fx Series User Manual
Telnet Commands
No
Yes
Yes
Version 1.3, Oct. 2018
Console Commands
No
No
Yes
- 76 -