Com1: Rs-232; Com2: Rs-422/485; Din-Rail Mounting - ICP DAS USA PDS-220F Series User Manual

Programmable Serial-to-Fiber Device Server

3. COM1: RS-232

For more detailed information regarding the pin assignments for the COM1 ports, refer to
2.6 "Pin Assignments".

4. COM2: RS-422/485

For more detailed information regarding the pin assignments for the COM2 ports, refer to
2.6 "Pin Assignments".

5. DIN-Rail Mounting

The PDS-220Fx Series contains simple rail clips to enable it to be reliably mounted on a standard 35
mm DIN rail. There are three DIN-Rail versions available that enable a variety of ICP DAS devices to
be mounted. Each is made of stainless steel and has a ground wire attached at one end.
Part number
DRS-125
DRS-240
DRS-360
Clip the PDS-220Fx Series onto a stainless DIN rail.

Pull down
A stainless steel DIN rail is recommended.
Dimensions
125 mm x 35 mm
240 mm x 35 mm
360 mm x 35 mm
PDS-220Fx Series User Manual
Push (Lock)
Version 1.3, Oct. 2018
Section
Section
- 15 -