Command List - ICP DAS USA PDS-220F Series User Manual

Programmable Serial-to-Fiber Device Server

7.3 Command List

Section Command
7.3.1 IPFILTER
7.3.2 IPCONF
7.3.3 SOCKET
7.3.4 COM
7.3.5 Broadcast
SystemTimeout
7.3.6
7.3.7 SocketTimeout
7.3.8 M
7.3.9 EchoCmdNo
EndChar
7.3.10
IP
7.3.11
7.3.12 MASK
7.3.13 GATEWAY
7.3.14 MAC
NAME
7.3.15
7.3.16 ALIAS
7.3.17 DHCP
UDP
7.3.18
7.3.19 VER
7.3.20 SAVE
LOAD
7.3.21
7.3.22 CONFIG
7.3.23 RESET
7.3.24 QUIT
Description
Retrieves/Sets the IP addresses that are allowed to access the PDS-220Fx.
Queries the network configuration. (IP/Mask/Gateway/MAC addresses).
Lists all the status of sockets (Listen/Not Used Yet) together with the type of each
socket (TCP Server: Port No./UDP/Unused).
Queries or sets the configuration of the COM Ports (Baud Rate/Parity /Stop Bits)
Queries or sets the Broadcast parameter, which determines whether or not the
module can receive Broadcast packets.
If PDS-220Fx has no network communications during the SystemTimeout period,
the PDS-220Fx will reboot it-self automatically.
If there is no data send/receive on the connection during the SocketTimeout
period, the PDS-220Fx will close the connection automatically.
Gets/Sets the echo mode.
/M0: Transparent Mode, Multi-Echo, Data-Shared.
/M1: Slave Mode, Single-Echo, None-Shared.
Queries or sets the EchoCmdNo parameter that enables or disables adding
Command Number before response.
Sets a character that determines the end of a response string.
Queries or sets the IP address.
Queries or sets the subnet Mask value.
Queries or sets the Gateway address.
Queries the MAC address.
Queries the module name.
Sets the alias for a PDS-220Fx.
Enables/Disables the DHCP client.
Sets whether to reply to a UDP search command.
Queries the version information
Determines whether or not backup copies of the "autoexec.bat" and "vcom.ini"
files are saved when using the "load" command.
Loads file to the built-in flash disk on PDS-220Fx . It should be used to update
firmware only.
Restores the factory default settings.
Reboots the PDS-220Fx module.
Exits the running firmware.
PDS-220Fx Series User Manual Version 1.3, Oct. 2018 - 77 -