ICP DAS USA PDS-220F Series User Manual page 42

Programmable Serial-to-Fiber Device Server
Item
Slave Timeout
Master ACK timeout (MAT)
Save current settings to
EEPROM
Apply current settings
SET COM PORT
Note:
After configuring COM Port Settings, please
confirm that the "Save current settings to EEPROM"
and "Apply current settings" option are checked, and
then click the "SET COM PORT" button.
Description
In M1 (Slave Mode), the slave mode timeout setting is use to set
the waiting time after last character of the request sent to the
device. If the device does not respond within the timeout value,
the PDS-220Fx will return a timeout error and process next
request.
If the PDS-220Fx does not receive any data from Slave for a
certain period, the PDS-220Fx will return an ACK character to
Master and process next request based on the configured
timeout value.
If the "SET COM PORT" button is clicked with checking "Save current settings to
EEPROM" option, the new settings will be saved to the PDS-220Fx only and the new
settings will be valid after the next power-on.
If the "Apply current settings" checked when the "SET COM PORT" button is
clicked, the new settings will be valid immediately.
Click this button to save the revised settings to the PDS-220Fx.
PDS-220Fx Series User Manual Version 1.3, Oct. 2018
Default
200 ms
0
(Disabled)
- 42 -