ICP DAS USA PDS-220F Series User Manual page 62

Programmable Serial-to-Fiber Device Server
4. Check the "Save current settings to EEPROM" and "Apply Current settings" options, and then
click the "SET COM
5. Click "Set Remote VCOM3
connection Setup Page (Pair-connection settings).

6. Select "Add COM" and type in the COM port of the PDS-220Fx #1 (Client) which you want to use.
Type the appropriate COM Port number, IP address and command port of the PDS-220Fx #2
(Server) settings in the relevant fields, for example "COM: 1", "IP: 10.0.8.130" and "cmd port:
10000".

PORT" button to finish configuration.
connection" to precede to the PDS-220Fx #1(Client) Remote Vcom3

PDS-220Fx Series User Manual
Figure 5-3-4
Figure 5-3-5
Version 1.3, Oct. 2018 - 62 -