ICP DAS USA PDS-220F Series User Manual page 71

Programmable Serial-to-Fiber Device Server
3. Select appropriate COM Port from the "Port (COM0 for ALL PORTS)" drop down options, for
example "COM2".
4. Select the appropriate Baud Rate and Data Format settings from the relevant drop down
options depending on your Modbus device, for example Baud Rate: 19200, Data Bits: 8, Parity:
None, Stop Bits: 2.
5. Select the "M0, M1 or M2" from the "Operation Mode" field, for example "M0 (Transparent
Mode)".
6. Check the "Save current settings to EEPROM", "Apply current settings" and then click the
"SET COM PORT" button to complete the setting.

PDS-220Fx Series User Manual



Figure 6-2-2
Version 1.3, Oct. 2018 - 71 -