Gateway; Mac - ICP DAS USA PDS-220F Series User Manual

Programmable Serial-to-Fiber Device Server

7.3.13 GATEWAY

This command is used to query or set the outgoing Gateway address of the subnet.
Effect: After the next reboot.
Command Arguments
Gateway
Gateway
= xxx.xxx.xxx.xxx
The figure illustrates is an example of a Gateway configuration.
Figure 7-3-13:

7.3.14 MAC

This command is used to query the MAC address.
Effect: Setting the address is not allowed.
Command Arguments
MAC
The figure illustrates is an example of a MAC configuration.
Figure 7-3-14:
Description
Queries the subnet Gateway value.
Sets the subnet Gateway value.
Description
Queries the MAC address.( Setting the address is not allowed)
PDS-220Fx Series User Manual Version 1.3, Oct. 2018 - 87 -