ICP DAS USA PDS-220F Series User Manual page 61

Programmable Serial-to-Fiber Device Server
1. Confirm that the PDS-220Fx are functioning correctly. Refer to
220Fx Module" for more details.

Step 1: Configuring the PDS-220Fx #1 in Client Mode
2. Enter the configuration of PDS-220Fx (Client) web server (refer to
PDS-220Fx Web Server") and then check your firmware version is v3.2.31 [Jun 19 2009] or later.
3. Click the "COM Port
Port number, Baud Rate and Data Format settings from the relevant drop down options, for
example "115200", "8", "None" and 1" .
Settings" tag to enter the settings page, and select the appropriate COM
PDS-220Fx Series User Manual
Chapter 3 "Setting up the PDS-
Section 4.1 "Logging in to the


Version 1.3, Oct. 2018
Figure 5-3-2
Figure 5-3-3
- 61 -