4.6.5.3
Connection for side-by-side installation of cabinet units
Description
Prefabricated cables for connecting the auxiliary power modules are attached to the -X101
terminal block of the module in each cabinet. If the cabinets are delivered as single units,
these must be routed to the next module and attached to the appropriate terminals of the
-X101 terminal block. The procedure is described below.
Note
Connecting the auxiliary voltage modules for transport units.
These connections are already established within transport units. Only the transport units
need to be interconnected.
Figure 4-9
Figure 4-10
Cabinet Modules
Manual, 03/2013, A5E03263538A
Connecting cables in the delivered state (e.g. transport units)
Connected connecting cables
Electrical installation
4.6 Connections
87