Connection Example - Siemens SINAMICS S120 Manual

Risk of electric shock!
Only temperature sensors that meet the safety isolation specifications stipulated in
EN 61800-5-1 may be connected to terminals "+Temp" and "-Temp".
Failure to observe these instructions can result in electric shock!
8.11.4

Connection example

Connection example 1: HTL encoder, bipolar, without zero mark -> p0405 = 9 (hex)
Figure 8-20
Connection example 2: TTL encoder, unipolar, without zero track -> p0405 = A (hex)
Figure 8-21
Cabinet Modules
Manual, 03/2013, A5E03263538A
DANGER
Connection example 1: HTL encoder, bipolar, without zero mark
Connection example 2: TTL encoder, unipolar, without zero track
8.11 K50, Sensor Module Cabinet-Mounted SMC30
Options
403