Y11, Factory Assembly Into Transport Units - Siemens SINAMICS S120 Manual

8.58

Y11, factory assembly into transport units

Availability of option
This option is available for the following S120 Cabinet Modules:
● Line Connection Modules
● Basic Line Modules
● Smart Line Modules
● Active Line Modules
● Booksize Base Cabinets
● Chassis format Motor Modules
● Central Braking Modules
● Auxiliary Power Supply Modules
Description
Cabinet Modules can be ordered as factory-assembled transport units with a maximum width
of up to 2400 mm. In this case, the relevant modules are shipped as interconnected units
(both electrically and mechanically).
Note
No additional wiring between the Cabinet Modules is required, with the exception of the
DRIVE-CLiQ connections used to interconnect the cabinets.
A crane transport assembly in the form of a crane transport rail is already included if
transport units are supplied.
Table 8- 77
Plain text required to order
Transport unit
Consecutive number of the transport unit
Position of the Cabinet Module within the transport unit
Cabinet Modules
Manual, 03/2013, A5E03263538A
Installation sequence of the transport unit
8.58 Y11, factory assembly into transport units
Options
TU 1 - 1...6
TU
1 -
1 ... 6
547