Siemens SINAMICS S120 Manual page 182

Cabinet Modules
5.3 Smart Line Modules
Order no.
Rated short-circuit current acc. to IEC
Minimum short-circuit current
The base load current I
1)
300 s.
The power required for the 500/690 V AC auxiliary supply is provided by the supply input voltage.
2)
The specified power loss equals the maximum value at 100 % capacity utilization. The value in normal operation is
3)
lower.
Total of all motor cables and DC link. Longer cable lengths for specific configurations are available on request, see
4)
SINAMICS - Low-Voltage Configuration Manual on the customer DVD supplied with the device.
The cabinet height increases by 250 mm with IP21 degree of protection, and by 400 mm with IP23, IP43 and IP54
5)
degrees of protection.
Current required for reliable tripping of the protective devices.
6)
180
6SL3730-
kA
A
6)
is based on a duty cycle of 150 % for 60 s or I
H DC
6TG35- 6TG38-
5AA3 8AA3
65 100
6200 10500
for 5 s with a duty cycle duration of
max DC
6TG41- 6TG41-
2AA3 7AA3
100 100
2500 3200
Cabinet Modules
Manual, 03/2013, A5E03263538A